Tungsten Carbide Tip Distal End Cutter – Round Body, Cut & Hold

$34.99

BusinessMed® Tungsten Carbide Tip Distal End Cutter is a round-body, cut-and-hold distal end cutter with tungsten carbide inserts at the cutting edges, made to trim and hold archwire ends at the last molar tube, for wires up to .028 in.

  • Round-profile handles, 8.5 mm
  • Hold feature on the jaw
  • German stainless steel, satin finish
In stockShips in 3–4 business days
Description

BusinessMed® Tungsten Carbide Tip Distal End Cutter carries tungsten carbide inserts set into the steel jaws, the edge material most suppliers of carbide wire cutters use because it is far harder than the stainless steel body; the round body fills the palm rather than presenting flat edges to it.

What is the tungsten carbide tip distal end cutter used for?

  • Distal archwire trimming: cutting and holding the wire end behind the last molar tube after placement, the same task as our steel-edged distal end cutters.
  • Hard archwires: routine cutting of stainless steel working wires, where an inserted carbide edge is the usual specification among orthodontic wire cutters.

Tungsten carbide tip distal end cutter specifications

AttributeSpecification
Manufacturer / BrandBusinessMed Instruments®
Instrument TypeDistal End Cutter, Cut & Hold, Tungsten Carbide Tip, Round Body
Product TypeOrthodontic Distal End (Archwire) Cutter with Safety Hold
Product CategoryDental Instruments
Sub-CategoryOrthodontic Instruments > Orthodontic Wire Cutters
Orthodontic DisciplineOrthodontics
Procedural IndicationDistal Archwire End Trimming After Archwire Placement
Anatomical TargetArchwire End Distal to the Last Molar Buccal Tube
Design/ShapeCutting Jaws at a Right Angle to Round-Body Handles
Plier PatternTungsten Carbide Tip Distal End Cutter, Round Body
Plier FunctionCutting + Holding (Cut-and-Hold)
Cutting CapacityWires up to .028 in
Cutting Edge MaterialTungsten Carbide Inserts
Working End DetailTungsten Carbide Cutting Inserts; Hold Feature
Handle TypeRound Body
Handle Diameter8.5 mm
MaterialGerman Stainless Steel
FinishSatin / Non-Reflective
SterilityNon-Sterile
ReusableYes (Autoclavable & Sterilizable)
Warranty5-Year Warranty
Shipping & Delivery

Dispatch
In-stock instruments leave our Sialkot facility within 3–4 business days of payment. Pre-order items ship within 15 business days.

Couriers and delivery time
We ship by DHL, FedEx, UPS, DPEX or DPD. Delivery usually takes 4–12 business days after dispatch, depending on the country. We email you the tracking number when your parcel is collected.

Shipping cost
Calculated at checkout from the destination and the weight of your order. Free shipping on orders over $299 to every country.

Customs duties and VAT
USA, EU and UK: we ship duty-paid whenever the courier and destination allow it, but we can't guarantee it for every parcel. Other countries: import duties and taxes are paid by the recipient on delivery.

Full details: Delivery Information. Questions: Support or [email protected].

RETURNS & REPLACEMENT
  • 30-day returns, from any country: return unused items in their original packaging within 30 days of delivery. You pay the return postage, and there is no restocking fee.
  • Damaged, wrong or missing items: send us your order number and photos within 7 days of delivery. We replace the item or refund you, and we pay the return shipping.
  • Faulty instruments: covered by our warranty, which is 5 years on stainless-steel instruments and 1 year on cables, lights and plastic parts. See Warranty and Services.
  • Not returnable unless faulty: custom-made, laser-marked or private-label items, and sterile or single-use items whose seal has been opened.

How to return: email [email protected] with your order number. We reply within 1 business day with a return (RMA) number and instructions. All returns go to our facility in Sialkot, Pakistan.

Full details, including the EU/UK consumer withdrawal right: Returns Policy · Refund Policy

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Tungsten Carbide Tip Distal End Cutter – Round Body, Cut & Hold”